Autowatch Ghost Installation
Autowatch Ghost is a revolutionary immobiliser that guards against key-cloning, hacking and vehicle theft. It can reduce your insurance rates and you could be eligible for incentives.
Simple and discrete easy to use, and easy to use, Ghost immobiliser is integrated into the vehicle's ECU. This makes it impossible to start the engine without a secret PIN code.
TASSA Approved
If you wish to stop your vehicle from being taken with key cloning then you will need to get the TASSA verified Autowatch Ghost immobiliser system. This is the latest in car security and deter thieves two ways - it will stop your vehicle from starting if your keys are copied and stops you from driving away if they have stolen your existing key fobs.
This device is the next generation and is connected to the CAN data network of your vehicle. A personal PIN code can be entered using standard buttons on the dashboard, or the steering wheel. The Ghost will stop the engine from starting. It can be programmed with a variety of settings such as Gear Change Blocking (vehicle-dependent), Stall on Start (vehicle-dependent) or Lock Gearbox. It is completely undetectable and doesn't use radio frequency signals so that it cannot be identified by RF scanning equipment or a code grabber.
The Ghost is a small weatherproof device that's completely sealed. It can be placed on the dashboard or in the vehicle. In contrast to other alarm and immobiliser systems on the market this is not a Thatcham Category approved product, but is recognised by insurance companies as a reliable anti-theft device. It comes with a five-year warranty.
The TASSA verification process assures that any installation work performed on the Ghost will be carried out by a qualified and experienced installer. This gives the client, insurers and police confidence in the integrity of any installation that is completed. This will also ensure that the installers follow the instructions of the manufacturer and properly install the product. Installers who are TASSA members are committed to excellence, and are determined to contribute to the fight against crime.
Compatible with a broad range of vehicles
The Autowatch Ghost 2 is a cutting-edge immobiliser that is designed to guard your vehicle from modern key cloning. Its PIN code system has been integrated into your car's ECU, making it more difficult for thieves to duplicate the keys or hack the system of your vehicle. Additionally, the device is discreet and is able to be installed in a wide range of vehicles including minivans, sports cars. It is also weatherproof, and small enough to keep out of sight. This makes it more difficult for thieves.
Installation of the Ghost is simple and does not require additional wiring. It is compatible with a variety of vehicles and utilizes the vehicle's CAN data networks to communicate. It can also be turned off or disabled on the vehicle's main screen. It is also compatible with a range of mobile apps, making it easy for you to manage your vehicle's security remotely.
Despite its many advantages despite its many advantages, Ghost has some issues that may arise after it is installed. These problems can be caused by a variety of factors, such as faulty wiring or an uncompatible mobile application. In these instances, calling a professional installer is the best approach to fix the issue.
Another problem encountered by users is the difficulty entering the Ghost's disarm sequence. This is often due to users not rehearsing or remembering the correct sequence. The manual for the device contains an emergency code which can be used if such issues occur.
Discreet
Autowatch Ghost is an advanced and discrete security system that protects against theft of vehicles. The device is inaccessible to thieves and relies on the CAN data network of your vehicle to perform its function. ghost immobiliser price TheKeyLab is also able to be activated by other security systems, like car alarms, and also provides real-time alerts to the owner. These features can help police in locating your vehicle if it is stolen.
The system can be set up in just a few minutes and is compatible with the majority of cars. It's a TASSA approved aftermarket device that is compatible with vehicle trackers. Some insurance companies even recognise it. It's also tamper-proof, and quiet and therefore criminals won't hearing it operate. Additionally the Ghost immobiliser can be programmed to require a PIN that can be as long as 20 digits that is nearly impossible to guess.
Another benefit of the Ghost is that it is only activated when the vehicle is set to Service/Valet mode. This means that you won't accidentally give your PIN number to anyone who needs to access the computer system of your vehicle, such as mechanics. The Ghost also comes with a five-year warranty.
The Autowatch Ghost is a revolutionary immobiliser that can stop key cloning as as ECU hacking, and car theft. It's an aftermarket CAN bus device that's an excellent alternative for older and new cars. It's simple to install and runs quietly, which means it can be fitted in any vehicle without cutting wires. It also allows you to change your pin numbers easily and only you will know it. The system also doesn't use RF scanning or code-grabbing technology which means it's virtually unnoticeable.
Easy to use
Autowatch Ghost is an innovative and efficient security system that was designed to prevent theft of vehicles by shutting off the engine. It operates by using a code that is personalised by the owner of the vehicle. The code must be entered in order for the car to begin. This technology is advanced and enhances the overall security measures of your vehicle and makes it a top choice for many motorists. However, executing this installation requires careful preparation and focus on the details. This includes checking compatibility and relying on expert knowledge and adherence to legal regulations as well as understanding the Ghost II’s operational dynamics. Prioritising these factors will ensure a successful installation, and optimum functionality.
The Ghost II is a silent system that is not spotted by thieves. It is also tiny and weatherproof, making it very difficult to gain access. It is compatible with CAN, Lenastark and other vehicles. It can be used in vehicles where the battery has to be isolated for maintenance. The Ghost 2 has a Transport Mode which disables the device when your vehicle is being rented out or loaned.
Before you can start the Ghost 2, you will be required to enter a pin code that is unique to you. Installers will set up an initial code, however it is recommended to change it as quickly as possible for your own safety. The device is able to enter sleep mode to preserve the battery, however should it detect a signal from the engine management system, it will wake up and block the vehicle from starting. This feature can be disabled in the Settings menu. It is recommended to only use the Ghost immobiliser when your vehicle is driven, and to always secure it prior to leaving it unattended.
Easy to install
The Autowatch Ghost II is an advanced security device that prevents car theft by removing the vehicle's engine. It operates by using a personal code that only the owner is aware of and is a reliable security measure against thieves. However, the installation process requires meticulous preparation and attention to the smallest of details. By ensuring compatibility, relying upon professional expertise in compliance with legal regulations and fully understanding the system's workings will ensure a seamless installation process and reap the maximum benefits from this security solution.
This unique CANbus immobiliser from Autowatch is simple to install and operates quietly, so that criminals can't hear it working. It uses CAN bus communication to communicate with the vehicle. It is compatible with a large range of vehicles. It is a real revolution in vehicle security. It protects you from car theft and key cloning. It's weatherproof and compact, so it's hard for criminals to spot it or modify it.
You will need to locate the CAN High (CAN H) & CAN Low (CAN L) Wires on the wiring diagram of your vehicle before you begin installing the Ghost Immobiliser. Then, connect the high wire of the CAN to the low and connect the CAN low to the ECU. These wires can be found on the dashboard, or near the engine.
It is best to work with an experienced and reputable installer for the installation of your Ghost immobiliser. You can rest assured that the system will be installed correctly and won't disrupt your vehicle's operation. Moreover the installer will be able to guide you on how to use your new device effectively.